Stihl MS 500i Manual De Instrucciones página 63

24 Combinations of Guide Bars and Saw Chains
Pitch Drive link
gauge/groove
width
0.063 in.
3/8"
(1.6 mm)
1)
Low kickback STIHL saw chain (with green label)
2)
STIHL saw chain (with yellow label)
The guide bar and chain combinations listed above meet the
45° computed kickback angle requirement of § 5.11 of
ANSI/OPEI B175.1 when used on this model chain saw with
the matching chain sprocket listed above.
0458-809-8621-A
Length Guide Bar
Rollomatic E
16 in. (40 cm)
Rollomatic ES
Rollomatic E
18 in. (45 cm) Rollomatic ES
Rollomatic E
Rollomatic E
Rollomatic ES
20 in. (50 cm)
Rollomatic ES Light
Rollomatic E
22 in. (55 cm) Rollomatic ES
Rollomatic E
25 in. (63 cm) Rollomatic ES
Rollomatic ES Light
Rollomatic ES
28 in. (71 cm)
Rollomatic ES Light
Rollomatic ES
30 in. (75 cm)
Duromatic E
Rollomatic ES
32 in. (80 cm)
Rollomatic ES Light
36 in. (90 cm) Rollomatic ES Light
Number of teeth Drive link
of sprocket nose count
2)
11
2)
2)
11
2)
1)
10
2)
2)
11
2)
1)
10
2)
11
2)
2)
11
2)
2)
11
2)
2)
11
2)
-
2)
11
2)
2)
11
Use replacement guide bars or chains only as listed above
or as listed elsewhere by STIHL as conforming with the 45°
computed kickback angle requirement of § 5.11 of
ANSI/OPEI B175.1 when used on this model chain saw.
The guide bars listed below are green-labeled reduced
kickback STIHL guide bars:
– Rollomatic E
– Drive link gauge/Groove width: 0,050 in. (1,3 mm) and
0,063 in. (1,6 mm)
– Length: 18 in. (45 cm) and 21 in. (53 cm)
– Number of teeth of sprocket nose: 10
– Rollomatic ES
– Drive link gauge/Groove width: 0,050 in. (1,3 mm)
– Length: 25 in. (63 cm)
English
Saw chain
60
66
72
36 RS (Type 3621)
36 RS3 (Type 3626)
76
36 RSF (Type 3678)
84
36 RM3 (Type 3664)
91
91
105
114
2)
1)
2)
1)
61