Becken BMF3184 Manual De Instrucciones página 9

Idiomas disponibles

2.2. Using the Product

Assembly

• The appliance must be fully assembled before use.

• Fit the wheels (21) into the fan base (19).

• Fit the fan base (19) into the main housing (16) and tighten the

threaded plastic part (20) clockwise.

• Attach the vertical stand (14) to the main housing (16) and tighten

the vertical support screw (15).

• Insert the rear guard (7) through the rear motor shaft (8) making

sure that the holes in the guard fit into the plastic studs of the

motor's housing.

• Turn the threaded plastic part (6) clockwise in order to attach the

guard.

• Insert the blade (5) onto the motor's shaft (8), then tighten threaded

plastic part (4) anticlockwise.

• Attach the humidifier (1) to the front panel (2) and tighten the

screws on the humidifier (3).

• Position the front panel (2) against the rear panel (7) so that you

can fit the guard ring (10) and tighten the screw (11).

• Fit the mist tube (22) into the humidifier plate (1).

Remote control

• The remote control is supplied with an internal battery (type

CR2025)

• Remove the clear film from the battery cover before using the

remote control.

Mist Fan | Ventilador con Humidificador | Ventoinha com Humidificador

AF Manual Ventoinha com Humidificador BMF3184 A5 EN.indd 9

21/05/2020 11:00