Idiomas disponibles
Idiomas disponibles
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
OVERVIEW
1.
Master Volume
Adjust the overall output level of the portable sound
system.
2.
USB port
Connect your USB devices to this slot to play music with
MP3 or WMA format.
3.
Mediaplayer
Mode button: Press the button to select BT or USB
function.
Play button: For switching between play and pause.
Forward - Backward button: For next or previous title
selection (short press) and forward or reverse (long
press).
4.
Treble
Adjust tone control for treble frequency.
5.
Mid
Adjust tone control for mid frequency.
6.
Bass
Adjust tone control for bass frequency.
7.
Line Level
Adjust the signal level of the line input.
8.
Microphone / Guitar Level
Adjust the signal level of the microphone / guitar input.
9.
Microphone / Guitar Input selector
Press this button to select XLR microphone input (13) or
for unbalanced signals from instruments using 6.3mm
(¼") Jack connector (12).
10. Aux Input
Jack 3.5mm connector for devices like a mobile phone.
11. Line input
RCA connector for devices like CD player, Tuner etc.
12. Guitar input
6.3mm (¼") jack input for unbalanced signals from
instruments
13. Microphone Input
XLR input jack for connecting a microphone.
14. Microphone Combi-Input
XLR and 6.3mm jack input for connecting a microphone.
15. Microphone/Line Switch
The MIC/LINE switch affects the output level of the THRU connector. Leave the switch out (LINE) when connecting the
THRU connector to a line-level input on a mixer. Push the switch in (MIC) when connecting the THRU connector to a
microphone input on a mixer.
16. THRU
Route a signal to another speaker or device by using a balanced XLR output connector. The THRU jack draws a signal
from just before the Master Volume and EQ section, combined with the input signal (14).
17. Power Input
Plug the included IEC power cable into this jack.
18. Power Switch
Turns the speaker on and off.
4
