Stihl RE 143 Manual De Instrucciones página 44

Ocultar thumbs Ver también para RE 143:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 109
English
High-pressure hose and
spray attachment in good
condition (clean, moving
easily) and correctly
assembled
For good control of the
machine, the handles
should be clean and dry
with no oil or dirt on them
Never attempt to modify
the controls or safety
devices in any way
Set up the machine so that
it cannot slip or tip over.
Only operate the machine
on stable and level ground
42
Electrical connection
WARNING
Minimize the risk of electrical
shock:
Voltage and frequency of
the machine (see rating
plate) must match the
voltage and frequency of
the mains supply
Examine the connecting
cord, power plug and
extension cord for
damage. Do not use the
machine with a damaged
connecting cord, extension
cord or damaged power
plug
Only connect the machine
to a correctly installed
power socket
The insulation on the
connecting cord and any
extension cord, the plug
and the coupling must be
fully intact
Never touch the power
plug, connecting cord and
extension cord and
electrical plug connections
with wet hands
WARNING
Route the connecting cord
and extension cord properly:
Observe the minimum
cross-section of the
individual cords – see
"Connecting the machine
to the power supply"
Route and mark the power
cord so that it cannot
become damaged and no
one is endangered –
danger of stumbling!
Use of unsuitable
extension cords can be
dangerous. Use only
extension cords that are
approved for outdoor use
and are correspondingly
marked and have a
sufficient cross-section
The connector and
coupling of the extension
cord must be waterproof
and they must not lie in
water
It is advisable to keep the
plug connection at least
60 mm above the
ground/floor, e.g. by using
a cable drum
RE 143, RE 143 PLUS, RE 163, RE 163 PLUS
Tabla de contenido
loading

Este manual también es adecuado para:

Re 163

Tabla de contenido