Kohler K-16109 Guia De Instalacion página 3

Plumbers
Putty
Sink
Washer
1. Spout/Handspray Installation
- Apply a bead of plumbers putty or other sealant to the underside of
the spout base according to the putty manufacturer's instructions.
- Thread the nut and washer to the bottom of the shank.
- Insert the shank from the bottom of the sink, and thread the spout
onto the shank. Back the spout off 1/8 turn after the spout bottoms
out.
- Tighten the nut and washer to secure the shank to the sink.
- Slide the provided gasket onto the spray holder.
- Slide the spray holder through the mounting hole from above.
- From under the sink, securely hand tighten the nut.
- Insert the handspray hose through the spray holder, and attach the
hose to the shank tee, using thread sealant.
Kohler Co.
Handspray
Spout
Putty
Shank
Shank
Tee
Nut
Handspray
Hose
3
Spray
Holder
Gasket
Nut
1004636-2-
A