Overview Of The Components - Clatronic MRC 7007 Manual De Instrucciones

1 DIMMER / HIGH / LOW / SLEEP / SNOOZE button
2 ON / OFF button
3 HOUR / TU− button
4 MIN / TU+ button
5 SET / PRE / M+ button
6 AL2 / VOL+ button
7 AL1 / VOL− button
8 Indicator for radio switched on ( FM )
9 Indicator for activated alarm function 2 ( AL 2 BUZZER ) ( Buzzer )
10 Indicator for activated alarm function 2 ( AL 2 RADIO ) ( Radio )
11 LED display
12 Indicator for activated alarm function 1 ( AL 1 RADIO ) ( Radio )
13 Indicator for activated alarm function 1 ( AL 1 BUZZER ) ( Buzzer )
Back Side ( not shown )
Battery compartment ( power reserve )
FM wire aerial
Mains cable
First Use of the Device / Introduction
• Select a proper place for the device. A dry, level and slip proof surface is suitable.
• Make sure the device is vented sufficiently!
• Remove the protective film from the device, if present.
• The display automatically switches to the time display after approx. 3 seconds.
Power Supply
1. Make sure the grid voltage corresponds to the figures on the rating plate.
2. Insert the mains plug to a properly installed socket.
NOTE:
• Disconnect from mains power supply during longer periods of non-use.
• If you did not insert another reserve battery, the time and the station memory will
be lost as soon as the power supply is interrupted.
34
MRC7007_CTC_IM

Overview of the Components

12.10.17