Idiomas disponibles
Idiomas disponibles
ENGLISH
- Normally when starting to charge the discharged battery, red and green LEDs of the battery
charger are on. When the battery is fully charged, only green LED is on. If no LEDs are on while the
charger is on, do not use the battery and the charger and take them to a service center.
- When using your tool continuously, the batteries in your battery pack will become hot. You should
let a hot battery to cool down for approximately 30 minutes before attempting to recharge.
- In case of long storage, store the battery in fully charged condition.
To ensure longer service life and proper performance of the battery, take the following actions
when you start using the new battery:
1-Use the new battery, without recharging it, until it is completely discharged.
2-Then charge the battery for 3-5 hs.
3-Repeat above mentioned steps 3-5 times to reach the nominal battery capacity.
4. MAINTENANCE
Make sure that the machine is not live when carrying out maintenance work on the motor.
Regularly clean the machine housing with a soft cloth and keep the ventilation slots free from dust
and dirt. If the dirt does not come off, use a soft cloth moistened with soapy water. Never use
solvents; they may damage the plastic parts. The machine requires no additional lubrication.
In order to prevent the machine from damage during transport, it is delivered in a sturdy packaging.
Most of the packaging materials can be recycled. Take them to appropriate recycling locations.
Lithium batteries can be recycled. Deliver them to a disposal site for chemical waste so they can be
recycled or disposed of in an environmentally friendly manner.
3
