Naterial ANEMO ZN DC116 Instrucciones De Montaje, Utilización Y Mantenimiento página 60

FR
WARNING! THIS INSTRUCTION MANUAL SHALL BE READ BEFORE THE USE AND
THE INSTALLATION OF THE PRODUCT.
WARNING: Important safety instructions. It is important for the safety of
ES
persons to follow these instructions. Save these instructions.
Never try to disassemble the wind sensor or repair the awning by yourself.
PT
Consult a competent technician for help.
IT
EL
1. GENERAL
PL
WARNING: Important safety instructions. Please follow all the instructions because a faulty
setup may result in serious injuries.
UA
Follow all safety instructions to avoid damage through improper use! Follow all warning
notices on the appliance.
RO
Keep this instruction manual for future use. Should this appliance be passed on to a third
party, this instruction manual must be included.
EN
Use this appliance only for its intended use.
No responsibility is accepted for damage resulting from improper use or non-compliance with
these instructions.
2. ASSEMBLY
A horizontal distance of at least 0.4 m is to be maintained between fully unrolled driven part
and any permanent object
Means for disconnection having a contact separation inali poles must be incorporated in the
xed wiring in accordance with the wiring rules, make sure that you have the appropriate
tools, and space, and a clean and dry area to perform the installation.
Before installing the product, remove the unnecessary cord and disable any equipment not
needed for power operation.
Choosing a safe location
In case of use of a command box, the electronics board must be set vertically and sheltered
from the weather
The installation can be made by non-professionaIs assuming the instruction is followed
correctly. Should you have any trouble during assembly, please consult a qua
help.
Be careful with y ngers during installation.
60
rson for