Russell Hobbs Glass Touch 14742-56 Instrucciones página 132

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
care and maintenance
1 Unplug the appliance and let it cool down before cleaning or storing away.
2 Use the grip at the bottom of the filter housing to swing it out from the coffee maker.
3 Use the handle on the filter to lift it out of the filter holder.
4 Tip the contents of the filter into the bin – don't flush coffee grounds down the sink. They'll
build up and cause a blockage.
5 Use the handle on the filter holder to lift it out.
6 You may clean the carafe, filter, and filter holder in warm soapy water. Rinse thoroughly
afterwards, to remove all traces of soap.
7 Clean the outside surfaces of the appliance with a damp cloth.
8 glass – You may remove the glass surrounding the filter housing, if you need to clean it.
a) Hold the bottom of the filter housing.
b) Gently turn the glass anti-clockwise (about 2cm), to release the bayonet fittings.
c) Lift the glass up and off the filter housing.
d) Clean the glass with a soft, damp cloth.
e) Don't soak the glass – you may soak off the bayonet fittings.
f) Check that the logo is the right way up.
g) Align the centre of the logo with the right edge of the slot.
h) Lower the glass, to fit the bayonet fittings on the inside of the glass to those on the
outside of the filter housing.
i) Turn the glass clockwise (about 2cm) to lock the bayonet fittings.
j) When you swing the filter housing back into place, the logo should appear directly below
the brew strength control.
9 The cut-outs in filter should face the front.
10 Drop the filter into the filter holder, and lower the filter handle.
11 Align the tube on the filter holder with the slot in the rim of the filter housing, then lower the
filter holder into the filter housing.
12 Swing the filter housing back into place. You should hear it click as the catch locks into place.
13 Don't put any part of the appliance in a dishwasher.
14 Don't put the appliance in water or any other liquid.
15 Don't use harsh or abrasive cleaning agents or solvents.
descaling
16 Scale build-up will cause the element to overheat, reducing its working life. It will also
lengthen the brewing time.
17 Descale regularly. If you notice the brewing time getting longer, shorten the time between
descalings. In areas of very hard water it may be necessary to descale as often as once a
month, or to use filtered water instead of ordinary tap water.
18 Use a proprietary brand of descaler suitable for use in plastic-bodied products. Follow the
instructions on the package of descaler. When descaling has finished, empty the carafe and
operate the coffee maker twice more with fresh water, but without coffee. Discard the water
to ensure that no chemical residues are left in the coffee maker.
, Products returned under guarantee with faults due to scale will be subject to a repair charge.
wheelie bin symbol
To avoid environmental and health problems due to hazardous substances in
electrical and electronic goods, appliances marked with this symbol mustn't be
disposed of with unsorted municipal waste, but recovered, reused, or recycled.
132
loading