Trevi TAB 10 4G S2 Manual Del Usuario página 19

Idiomas disponibles
  • ES

Idiomas disponibles

3. When the battery icon is no longer moving or the charge percentage will indicate 100%,
disconnect the device from the power supply.
Note
• Use only the supplied power supply, different power supplies could damage the battery.
• The device is charged even when it is connected to the computer via USB cable.
• When using the device for the first time, it is recommended to fully charge the battery.
• You can use the device even when it is being charged, but, for a longer battery life, its
use is not recommended; moreover, using the device, the charging times are extended.
• While recharging the battery, the controls on the Touch Screen may not work properly,
this is due to the unstable power supply, just unplug the power supply to make the
device work properly.
• During recharging, the device may increase in temperature, this does not affect the
performance and life of the device.
• Before the complete exhaustion of the battery, the device will warn to connect the
device to the power supply. When the battery is completely exhausted, the device will
automatically turn off.
WARNING FOR CORRECT USE OF THE RECHARGEABLE BATTERY
• Recharge the battery at a temperature between 5°C and 35°C.
• Do not extend the recharge beyond the normal times, to avoid the risk of overheating
and bursting.
• Charging the battery beyond normal times or a prolonged period of inactivity can shorten
its life.
• The rechargeable battery is subject to wear and its capacity gradually decreases.
To extend the life of the battery, use it when it is fully charged until it is completely exhau-
sted, then recharge it again before using the device again. By charging a battery that is
not completely exhausted, its duration will be reduced, in this case, repeat the complete
charging/discharging cycle several times.
19
loading