Idiomas disponibles
Idiomas disponibles
• Leave at least 1m of free space on the sides, behind the appliance and above it (fig. 1).
• Make sure the knob (7) is set to "O".
• Connect the plug to the power socket.
• Make sure the mains data correspond to
what is described on the data plate of the
appliance.
• Arrange cord away from traffic areas so
that it will not be tripped over.
3 - USE
Knob "7"
•
Knob set to "O" :
•
"VENTILATION" function :
•
"MINIMUM POWER" function :
•
"MAXIMUM POWER" function :
Knob "8" - Thermostat
•
Start the appliance by rotating the knob (7) to "
•
To set the room temperature to a specific value (thermostatation), rotate the knob
"8" clockwise until it stops.
•
Once the desired temperature of the room has been reached, slowly rotate the
knob "8" anticlockwise until the appliance switches off.
•
At this point, the appliance will reactivate automatically when the room temperature
lowers beyond the set limit and will switch off again once the room temperature
reaches the set value.
8
appliance OFF
rotate the knob to "
rotate the knob to "
rotate the knob to "
7
" position.
•
" position.
• •
" position.
•
• •
" position or to "
CALDO RELAX
" position.
EN - 9
