Naterial DORA FIX 3276007278163 Instrucciones De Montaje, Utilización Y Mantenimiento página 39

Cleaning
EN
You can clean your aluminium furniture with a non-abrasive sponge. Use clear water with a little soap. In order to avoid
the appearance of traces during the drying, we advise you to proceed to the drying with a terry towel, right after the cleaning.
Wood is a living material that is very aesthetic, warm and efficient but it requires maintenance. It is recommended to maintain
your wooden garden furniture twice a year. A first time in spring and then at the end of the summer. The cleaning is done with a
brush and warm soapy water. But not with just any soap. The use of black soap or Marseille soap is preferred. Rinse thoroughly with
lukewarm water. In any case, do not use a high pressure cleaner. If you want the wood to keep its original colour over time, use a "colourless saturator"
that nourishes the wood and protects its natural appearance for a long time. Apply the saturator twice a year on wood that has been cleaned beforehand
with a dry cloth and apply it in the direction of the wood fibres. If after cleaning, stains remain, you can then sand the surface with fine grain sandpaper.
This is the advantage of solid wood. If you have neglected the maintenance of your wooden furniture until now, it is not too late to make up for the damage.
Whatever your case, test your solution on an inconspicuous area to make sure the result is what you want.
PICTO Care
Wintering
In case of prolonged non-use or bad weather, it is recommended to store your product in a dry place or to use a suitable cover to protect your it.
5. FASTENINGS
For better stability and for your safety, tighten the screws once again around two weeks after setup. Tighten the screws also at least once a year for a
long-lasting maintenance.
6. REPAIR
Let's not throw away! Let's repair! Repairing a product is a quick and easy way to significantly increase its lifespan and avoid throwing it away. At
Naterial, we actively work to facilitate the repair of our products and offer the right spare parts for each product we sell. The service department
at your point of sale has a list of spare parts available for that product. In case of a defective or broken part, we invite you to contact the after-sales
service of your point of sale.
7. LET'S PROTECT OUR ENVIRONMENT
In order to protect the environment, cardboard packaging and products at the end of their life cycle must be dropped off at a waste collection
organization for sorting, processing and a new life.