Idiomas disponibles
Idiomas disponibles
k)
Do not clean the appliance with acidic substances, medical products, thinners,
fuel, oil or other chemicals as they may damage it.
DISPOSAL OF WASTE APPLIANCES
At the end of its service life, this product must not be disposed of with mixed
household waste; return it to a collector/recycler of waste electrical and electronic
equipment. This is shown by the symbol placed on the product, the user manual
or the packaging. The materials used in the appliance can be reused according to
their classification identifications. By reuse, recycling or applying other forms of
use of waste appliances, you make a significant contribution to the protection of
our environment.
Local administration will provide you with the information about the nearest
disposal locations for the appliance.
TROUBLESHOOTING
Problem
Error code "UH"
Error code "UL"
Error code "JJJ"
Error code "CCC"
The appliance will
not turn on.
The refrigerating
system will not run.
The appliance will
not refrigerate.
The stirrer(s) will not
stop once the batch
has been processed.
The batch cannot be
dispensed.
The preprocessed
batch is too thin or
thick.
The preprocessed
batch is leaking.
Possible cause
Incorrect supply voltage.
Stirring chamber icing
protection tripped. The ice
will take 5 minutes to thaw.
The dispensing lever is held
to open the dispenser for
more than 1 minute.
Incorrect connection to the
mains.
Incorrect supply voltage.
The refrigerating system has
failed.
Refrigerating system /
relevant control panel key
malfunction.
The batch level is too low /
the refrigerating chamber
ducts are obstructed
Incorrect settings / the
stirrer drive unit has failed.
Incorrect assembly of the
appliance parts.
Action
Verify the supply voltage is
correct.
Wait until this process is
complete.
Switch the dispensing lever
to close the dispenser.
Power cycle the appliance.
Check the appliance's
connection to the mains.
Check the supply voltage.
Contact the manufacturer's
service.
Contact the manufacturer's
service.
Refill with enough batch /
disassemble and clean the
appliance parts.
Verify the settings / Contact
the manufacturer's service.
Verify the appliance parts
for correct assembly.
