Suzuki 57100-1081 Serie Instrucciones De Instalación página 9

・ When the grip cannot be
inserted in midway, pull
out the grip by pouring
the degreasing agent into
a gap between the grip
heater and the handlebar.
At this time, do not twist
forcibly the heater wire
with a screw-driver or
s u c h s i m i l a r t o o l , t h e
heater wire inside the grip
heater may be cut off.
WARNING
U s e a n a p p r o p r i a t e g r i p
c e m e n t a n d
sufficient time. Don't touch
and don't use the grip heater
till it adheres completely .
If it hasn't completely adhered,
there is a risk that the grip
may slip off while riding.
WARNING
Make sure if there isn't the
t e n s i o n o f t h e l e a d w i r e ,
contact to other parts, catch in
the throttle operation and so
on, when operating the lever
and the stationary steering .
6. Reinstall the existing handle-
bar balancer that was removed
in step 1.
Bolt (M8)
23N . m(2.3 kgf-m, 17.0 lbf-ft)
c u r e f o r a
GENUINE SUZUKI ACCESSORIES
9 /17