Selecta TEMPLOW L 2101280 Manual De Instrucciones página 22

INSTRUCTIONS MANUAL CODE 80170 REV D 07/2020 Pag. 22
7. Transfer the upper hinge bracket and covers to the opposite side.
8. Turn the door by 180°.
9. Insert the bearing ring and hinge bushing in the upper door mounting.
10. Keeping door open at 90°, suspend in top square pin.
WARNING!
It is essential that the door is open at an angle of 90° during instal-
lation.
If the door is installed in the closed position, this will lead to destruc-
tion of the self-closing mechanism on the first opening and closing
of the door.
IMPORTANT
As a result of its heavy weight, the door must be held secure by one
person.
11. Fit the hinge components on the hinge bracket.
J
.P. SELECTA s.a.u. Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España Tel (34) 93 770 08 77 Fax (34) 93 770 23 62
e-mail: [email protected] - http://www.jpselecta.es