Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
enGliSH
Dc cUrrent 200ma to 10a
1. For DC currents more than 200mA and less than 10A, insert
RED test lead into 10A jack
jack
10A DC setting.
Dc cUrrent leSS tHan 200ma
2. For mA DC currents less than 200mA, insert RED test lead into
VΩ jack
function selector switch
3. To measure current: Remove power from circuit, open circuit at
measurement point, connect meter in-series in the circuit using
the test leads, and apply power to circuit.The meter will auto-
range to display the measurement in the most appropriate range.
note: If measuring mA, the function selector switch
rotated to successively lower mA DC settings to obtain higher
resolution measurements.
Do not attempt to measure more than 10a.
When measuring currents greater than 6a, a measurement
time of 30 seconds followed by 10 minutes of recovery time
is recommended.
8
MM300-1390109ART.indd 8
operatinG inStrUctionS
, and rotate function selector switch
4
Red lead Black lead
, and BLACK test lead into COM jack
5
Black lead
Dwg Name: MM300-1390109ART
Dwg No: 1390109
ECO No: 20617
Pkg Dwg Ref: 1290186
Color Reference: N/A
, and BLACK test lead into COM
3
to the highest mA DC setting (200mA).
2
Red lead
Rev: E
to the
2
, and rotate
4
may be
2
9/21/2015 2:48:04 PM
reSiSt
1. Inse
into
high
2. Rem
3. Mea
rota
low
note:
(not co
test, th
Do
