Idiomas disponibles
Idiomas disponibles
EN
34
Upper control panel
1
Start/Stop button
2
Light button
3
Compressor operation indicator
4
Digital display of the temperature in the upper zone
5
Digital display of the temperature in the middle zone
6
Setting button for the upper zone
7
Setting button for the middle zone
Lower control panel
8
Display screen for lower zone
9
To increase temperature by 1 °C in lower zone
10 To decrease temperature by 1 °C in lower zone
USAGE
Starting up the device
Once the wine cabinet is properly installed, we advise that you clean the inside
using warm water with a low concentration of dishwashing liquid. Do not use
abrasives or scouring powder; they may scratch the surface finish.
•
Your wine cabinet is ideally suitable for holding Bordeaux type bottles of 0.75
L capacity. It can contain larger bottles; however care must be taken that they
do not prevent the door from closing properly.
•
When closing the door ensure that it does not touch any of the bottles.
•
If you load several bottles at a time, it will take longer before the cabinet
reaches the desired temperature.
•
In order to avoid damaging the door seal, ensure that the door is fully open
before moving the racks along the compartment rails.
