LEGRAND Wattstopper LMDC-100 Instrucciones página 2

The LMDC-100 provides a 360° coverage pattern. The coverage shown represents maximum coverage for walking motion at a
mounting height of 10 feet.
To octagon box:
Ceiling
LMRJ cable
For applications requiring plenum rating
WARNING: A junction box used for sensor installation must not contain any Class 1, Class 3, or other power or lighting line voltage
circuits.
The illustrations below show examples of free-topology wiring. The LMDC-100 communicates to all other Digital Lighting Management
devices connected to the low voltage DLM Local Network, regardless of their position on the DLM Local Network.
Corner Mount Ceiling Mount
Sensor Sensor
Switch Switch
Daylight Sensor
COVERAGE PATTERN
Ultrasonic
Coverage
PIR Coverage
Ultrasonic
25 ft x 25 ft
(7.62m x 7.62m)
4" Octagonal J-Box
(at least 1.5" deep)
Screws
Rear
housing
Front cover
Line
Voltage
DLM Local Network
Low Voltage
LMRJ Cables
Line/Hot Neutral
Black wire White wire
LMRC
102
Room
Controller
Red wire
to Load A (1)
J-Boxes
MOUNTING
Through ceiling tile:
Ceiling hole
LMRJ cable
No box required in non-plenum rated applications
CONNECTIVITY
Loads
1
To
Load
2
Yellow wire
to Load B (2)
2
PIR
32 ft
(9.75m)
Room
Controller
J Box
Switch
Ceiling Mount
Occupancy
Sensor
Rear
housing
Spring clips (2)
Front cover