Idiomas disponibles
Idiomas disponibles
Problem
Temperature is not properly
adjusted.
Door was open for an
extended period.
The food is
A large quantity of warm food
too warm.
was placed in the appliance
within the last 24 hours.
The appliance is near a heat
source.
Interior
Light bulb is defective
lighting does
not work.
Door seal is not air-tight
Heavy build-
(possibly after reversing the
up of frost,
door).
possibly also
on the door
seal.
Appliance is not levelled.
The appliance is touching
the wall or other objects.
Unusual
A component, e.g. a pipe, on
noises.
the rear of the appliance is
touching another part of the
appliance or the wall.
The
This is normal, no error has
compressor
occurred.
does not start
immediately
after
changing the
temperature
setting.
Single Door Refrigerator | Frigorífico Una Puerta | Frigorífico Uma Porta
Possible cause
Solution
Refer to the "Product usage"
section.
Open the door only as long as
necessary.
Turn the temperature
regulation to a colder setting
temporarily.
Please look in the "installation
location" section.
Please refer to the "Replacing
the lighting lamp" section
Carefully warm the leaking
sections of the door seal
with a hair dryer (on a cool
setting). At the same time
shape the warmed door seal
by hand such that it sits
correctly.
Readjust the feet.
Move the appliance slightly.
If necessary, carefully bend
the component out of the
way.
The compressor starts after
a period of time.
EN
33
