Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
• If the snow blower strikes a foreign object follow these steps:
1) Stop snow blower. Release the switch.
2) Remove the battery pack(s).
3) Inspect the snow blower for damage.
4) Repair any damage before restarting and operating the snow blower.
• Store idle snow blowers indoors - When not in use, snow blowers should be stored indoors
in dry, locked-up place and out of reach of children.
• Maintain snow blowers with care – Following all instructions for lubricating and changing
accessories.
TRAINING
• Read, understand and follow all instructions on the machine and in the manual(s) before
operating this unit. Be thoroughly familiar with the controls and the proper use of the
equipment. Know how to stop the unit and disengage the controls quickly.
• Never allow children to operate the equipment. Never allow adults to operate the equipment
without proper instruction.
• Keep the area of operation clear of all persons, particularly small children.
• Exercise caution to avoid slipping or falling, especially when operating the snow blower in
reverse.
PREPARATION
• Thoroughly inspect the area where the equipment is to be used and remove all doormats,
sleds, boards, wires, and other foreign objects.
• Do not operate the equipment without wearing adequate winter garments. Avoid loose-fitting
clothing that can get caught in moving parts. Wear footwear that will improve footing on
slippery surfaces.
• Never attempt to make any adjustments while the motor is running (except when specifically
recommended by manufacturer).
• Always wear safety glasses or eye shields during operation or while performing an
adjustment or repair to protect eyes from foreign objects that may be thrown from the machine.
OPERATION
• Do not put hands or feet near or under rotating parts. Keep clear of the discharger opening
at all times.
• Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay
alert for hidden hazards or traffic.
• After striking a foreign object, stop the motor, remove the battery pack(s), thoroughly inspect
the snow blower for any damage, and repair the damage before restarting and operating the
snow blower.
• If the unit should start to vibrate abnormally, stop the motor and check immediately for the
cause. Vibration is generally a warning of trouble.
• Stop the motor whenever you leave the operating position, before unclogging the auger
assembly housing or discharge chute, and when making any repairs, adjustments or
inspections.
• When clearing, repairing or inspecting the snow blower, stop the motor and make certain the
auger assembly and all moving parts have stopped. Remove the battery pack(s) to prevent
someone from accidentally starting the motor.
• Exercise extreme caution when operating on slopes.
• Never operate the snow blower without proper guards and other safety protective devices in
place and working.
8
