USO
- USE - UTILISATION
GEBRAUCH - USO - USO
Segnalazioni di Warning
IT
INIZIALIZZAZIONE:
• Pulsazione dell' icona "COLOR" (20s circa): il sistema si sta ini-
zializzando; al termine della procedura la pulsazione termina
e riprende il funzionamento normale.
INDICAZIONI LAMPEGGIO TASTI:
• Lampeggio veloce di tutti i tasti (0,5s circa): WARNING - è sta-
to premuto un tasto e sulla tastiera è presente una quantità
di acqua tale da non consentire la corretta rilevazione del
tasto premuto. Potrebbe comparire anche nel caso in cui si
tenti di premere due tasti contemporaneamente o si vada
a toccare il vetro con "corpi" conduttivi (mano aperta, pan-
no umido per la pulizia, oggetti metallici, ecc......). Con questa
segnalazione viene segnalato all'utente un uso improprio della ta-
stiera e si evita di accendere funzioni non desiderate.
• Pulsazione tasto "LIGHT": Malfunzionamento della tastiera
capacitiva (ERRORE). Provare a resettare la segnalazione to-
gliendo e ridando alimentazione. Se la segnalazione persiste
contattare l'assistenza.
• Pulsazione tasto "FEEL": Errore di sistema (ERRORE). Provare a
resettare la segnalazione togliendo e ridando alimentazione.
Se la segnalazione persiste contattare l'assistenza.
• Pulsazione tastI "LIGHT" + "FEEL": Dispositivo mancante o mal-
funzionante (ERRORE). Contattare l'assistenza.
PULSANTIERA ESTERNA (OPZIONALE)
te una sequenza ripetitiva di:
• 4 colori: ROSSO - BLU - VERDE - GIALLO,
e, a seguire,
• 4 scenari: ALBA - TRA LE FOGLIE - TRAMONTO - NOTTURNO.
Quando appare il colore o lo scenario desiderato, rilasciare la
pressione del tasto: il colore o lo scenario presente diventerà fisso.
Accendendo la cromoterapia si attiva l'ultimo colore o lo scenario
precedentemente selezionato da pulsante o da pannello touch
(se presente).
NOTE:
L'attivazione di una funzione mentre un'altra è già attiva, compor-
ta la disattivazione di quest'ultima.
In caso sia presente anche il pannello Touch, quest'ultimo allinea
la retroilluminazione dei tasti alla funzione selezionata mediante
i pulsanti.
Tasto Luce bianca (On/Off): con
una pressione breve del tasto si
accende/spegne la luce bianca.
Tasto funzione COLOR - FEEL
(On/Off + Change):
Con pressione breve del tasto: si
accende/spegne la lampada cro-
moterapia.
Mantenendo premuto il tasto par-
Warnings
EN
INITIALISATION:
• "COLOR" icon pulsating (approx. 20s): the system is
initialising; once the procedure is complete, the pulsation
stops and normal operation is
FLASHING BUTTONS KEY:
• All buttons flash quickly (approx. 0.5s): WARNING - a button
has been pressed but there is too much water on the
keyboard to correctly detect which button was pressed. This
may also happen if you try to press two buttons at the same
time or if a conductive "body" comes into contact with the
glass (e.g. open hand, damp cleaning cloth, metallic object,
etc.). This warning alerts the user to improper use of the keyboard
and avoids unwanted functions being activated.
• "LIGHT" button pulsating: Capacitive keyboard malfunction
(ERROR). Try resetting the warning by turning the power
off and then on again. If the warning persists, contact the
support service.
• "FEEL" button pulsating: System error (ERROR). Try resetting
the warning by turning the power off and then on again. If
the warning persists, contact the support service.
"LIGHT" + "FEEL" buttons pulsating: Missing or malfunctioning
device (ERROR). Contact the support service.
EXTERNAL PANEL (OPTIONAL)
Press and hold the button to start the following sequence that
repeats:
• 4 colours: RED - BLUE - GREEN -YELLOW,
and then
• 4 feels: DAWN - AMONG THE LEAVES - SUNSET - NIGHTTIME.
Release the button when you reach the desired colour or feel. The
colour or feel will remain on.
When you turn on colour therapy, the last colour or feel selected
by pressing the button or touch panel (where present) is
activated.
NOTES:
Activating a function when another one is already active
deactivates the one already running.
If you have a Touch panel, this panel adjusts the button
backlighting to the function selected using the buttons.
58
resumed.
White light on/off: press the
button to turn the white light on/
off.
COLOR - FEEL button (On/Off +
Change):
Press the button to turn the colour
therapy light on/off.