Proxxon IBS/A Manual Del Usuario página 13

Translation of the Original
GB
Operating Instructions
PROXXON - IBS/A
Dear customer!
Always keep these operating instructions and the
enclosed safety guidelines within reach.
Only use this device with exact knowledge of it and
comply with the instructions and safety guidelines!
This is necessary to ensure safe operation and, se-
condly, it simplifi es familiarisation with the device
and its functions.
Proxxon assumes no liability for the safe function of
the device in the case of:
• handling that does not comply with normal
intended use,
• use for other purposes not mentioned in the
manual,
• incorrectly executed repairs,
• failure to heed safety instructions,
• external infl uences for which the manufacturer
is not responsible
We recommend using PROXXON original spare
parts for all repair and maintenance work.
Repairs should only be performed by qualifi ed
skilled personnel!
Please note: All information contained in these ope-
rating instructions - especially the technical data
- corresponds to the status at the time of printing.
We reserve the right to make further developments
in the interest of technical progress. We wish you
every success with the device.
WARNING!
Read all safety warnings and ins-
tructions. Failure to follow all safety
warnings and instructions listed below
may result in electric shock, fi re and/or serious
injury.
All manuals and user guides at all-guides.com
KEEP ALL SAFETY WARNINGS AND INSTRUC-
TIONS FOR THE FUTURE !
Safety warnings common for grinding, sanding,
wire brushing, polishing, carving or abrasive
cutting-off operations:
a) This power tool is intended to function as a
grinder, sander, wire brush, polisher, carving or
cut-off tool. Read all safety warnings, instruc-
tions, illustrations and specifi cations provided
with this power tool. Failure to follow all instruc-
tions listed below may result in electric shock,
fi re and/or serious injury.
c) Do not use accessories which are not speci-
fi cally designed and recommended by the tool
manufacturer. Just because the accessory can
be attached to your power tool, it does not assure
safe operation.
d) The rated speed of the grinding accessories
must be at least equal to the maximum speed
marked on the power tool. Grinding accessories
running faster than their rated speed can break
and fl y apart.
e) The outside diameter and the thickness of
your accessory must be within the capacity ra-
ting of your power tool. Incorrectly sized acces-
sories cannot be adequately controlled.
f) The arbour size of wheels, sanding drums or
any other accessory must properly fi t the spindle
or collet of the power tool. Accessories that do
not match the mounting hardware of the power
tool will run out of balance, vibrate excessively
and may cause loss of control.
g) Mandrel mounted wheels, sanding drums,
cutters or other accessories must be fully in-
serted into the collet or chuck. If the mandrel
is insuffi ciently held and/or the overhang of the
wheel is too long, the mounted wheel may be-
come loose and be ejected at high velocity.
h) Do not use a damaged accessory. Before
each use inspect the accessory such as abra-
- 13 -