Concept VP 4115 Manual De Instrucciones página 40

All manuals and user guides at all-guides.com
EN
USING THE VACUUM CLEANER
NOTE: Prior to using the vacuum cleaner, please make sure that the filters have been installed properly.
STICK VACUUM CLEANER
1. Switch on the vacuum cleaner using the switch on the stick part holder.
2. After use, switch off the vacuum cleaner with the switch on the stick part holder.
3. Press the Hi/Lo button on the portable part to decrease or increase engine speed.
HAND-HELD VACUUM CLEANER
1. Press the latches on the stick part to detach the portable part of the vacuum cleaner ( Fig. 1).
2. Press long the ON/OFF s witch on the portable part holder to switch on the vacuum cleaner .
3. After use, press the switch on the portable part holder to switch the vacuum cleaner off.
4. Press the Hi/Lo button on the portable part to decrease or increase engine speed.
Note: To vacuum areas with difficult access, the nozzle of the vacuum cleaner can be extended (Fig. 4).
CHECKING THE DUST RECEPTACLE LEVEL
If the suction power of the vacuum cleaner drops or the dust receptacle is full, empty it and clean the filters of
the vacuum cleaner.
MAINTENANCE
As a preventative measure, we recommend emptying the dust receptacle and cleaning the filters of the
vacuum cleaner after each use.
EMPTYING THE DUST RECEPTACLE
1. Disconnect the charging adapter from the power mains.
2. Detach the portable part of the vacuum cleaner from the stick part.
3. Hold the portable part of the vacuum cleaner with the dust receptacle down.
4. Press and hold the dust receptacle latch and turn the dust receptacle slightly to release it (Fig. 5).
5. Remove both filters and empty the dust receptacle of the vacuum cleaner.
6. Reverse the steps to fit both filters and mount the dust receptacle back on the portable part of the vacuum
cleaner.
F ig . 4
CLEANING AND REPLACING THE FILTERS
The filters of the vacuum cleaner can be cleaned by mechanical shaking and cleaning with a soft brush.
Heavily fouled filters can be washed after this step and cleaned with a soft brush in lukewarm water. Do not
use detergents.
It is important to let the wet parts dry thoroughly. Wet filters might be damaged if used for
vacuuming!
40
F ig . 5
VP 411 5