and irreversible damage to the eyes, primarily by burning the retina (the area of the
eye that is sensitive to light, located at the rear of the eye socket). Even though one
does not get any sensation of 'heat' from a laser beam, it is quite capable of
causing harm to vision, or even blinding, the user or the public.
-
Laser beams are potentially dangerous, even at low doses or over long distances.
-
So, NEVER gaze at the window through which the laser beam is emitted, nor at the
laser beam itself.
-
Never aim the laser beam directly at people or animals, and never leave the
appliance running within reach of the public without supervision.
-
This laser may be used only to frighten birds. Use of a class 3B laser is authorised
only when it is operated by qualified and properly trained operators.
-
Depending on category, use of a laser can produce radiation that will permanently
damage the eyes and/or skin. Laws on the use of laser products vary from one
country to another. It is for the user to ensure he/she receives good advice, and
that he/she applies the legislation and safety measures in force in his own country.
-
The basic documentation and the cornerstone of safety standards relating to laser
beams (ANSI Z136.1-2007) acts as guide in respect of the use of laser beams and
laser-based systems, by laying down control measures for each of the four laser
classes. This useful document can be obtained at website:
-
WEITECH cannot in any circumstances be held liable for any damage caused by
faulty installation and/or non-qualified operators!
DESCRIPTION
www.laserinstitute.org
31. ON-OFF SWITCH: used to turn the appliance on/off
32. FUSE: 1 A/250 V AC slow
33. SECTOR POWER-SUPPLY INPUT: IEC socket with integral fuse. Connect the
34. EARTH
35. INTERLOCK INPUT: provides the facility to connect an emergency stop button to
36. KEY-OPERATED ON-OFF SWITCH: used to activate / deactivate the laser. Use
37. COOLER AIR-VENT: used to cool components inside the appliance case. Ensure
38. SAFETY HOOK: used to attach a safety cable when the appliance is suspended.
power-supply cable provided to this socket.
the appliance (optional). By pressing this button, the laser beam will immediately
cut out.
the keys to ensure that only experienced operators are able to turn the laser on.
that this air-extractor vent is never covered up.
(refer to paragraph on installing at a height)
BIRD LAZZZER 16/11/2020