Idiomas disponibles
Idiomas disponibles
This symbol means: for use indoors only.
This symbol means: read the directions for use
This symbol represents the minimum retreating distance to be observed, in other words the
minimum distance between the projector and the area to be illuminated. This distance must
be greater than 1 metre.
-
In order to protect the environment, please recycle packaging whenever possible.
-
A new light effect can produce unwanted smoke and/or odours, which will normally
disappear after a few minutes' use.
-
In order to prevent any fire risk or electrical discharge, do not expose the appliance
to rain or high humidity.
-
To prevent the formation of condensation inside the appliance, give a few minutes
to allow the appliance to adjust to the ambient temperature upon arrival in heated
areas after shipping. Condensation will prevent the appliance from functioning
properly, and may even cause damage.
-
This appliance is intended for indoor use only.
-
Do not insert any metal objects or pour any liquid inside the appliance. No object
containing any liquid is to be placed on top of the appliance, as this would incur a
risk of triggering an electrical discharge or causing a malfunction. If any foreign
body arrives inside the appliance, immediately disconnect the power supply.
-
No naked flames, such as lit candles, must be placed on top of the appliance.
-
Place the appliance in a well-ventilated place, well away from any inflammable
materials or liquids. The appliance must be fixed at least 50 cm away from walls.
-
Do not cover up air-vents; this would create a danger of overheating.
-
Do not use the appliance in a dust-laden environment, and clean it regularly.
-
Do not leave the appliance within reach of children.
-
Inexperienced persons are not to use the appliance.
-
The maximum ambient temperature when using the appliance is 45°C. Do not use
it above this temperature.
-
Wall temperatures of the appliance can reach 85°C. Do not touch walls with the
naked hand whilst in operation.
-
Ensure that the area under the place of installation does not have any itinerant
persons present whilst installing, dismantling or during maintenance work.
-
Allow the appliance to cool down for about 10 minutes before carrying out repairs.
-
Always switch the appliance off when not in use for a prolonged period or before
carrying out repairs.
-
Electrical installation work should be carried out only by qualified personnel, in
accordance with electrical safety regulations in force in your country.
-
Ensure that the electricity supply voltage in your area does not exceed that shown
on the rear of the appliance.
-
The supply cable must always be in perfect condition. Turn off the power supply
immediately if the cable is crushed or otherwise damaged. To avoid any risk of
electric shocks, the cable must be replaced by the builder, his agent or a qualified
technician.
-
The appliance must be earthed in accordance with standard safety regulations.
-
Do not connect the unit to a dimmer switch.
-
Always use the suitable certified cables when installing the appliance.
-
In order to prevent any electrical discharge, do not open the appliance. There are
no components inside that can be changed by the user.
-
Never repair or short-circuit a fuse. Always replace a damaged fuse with a new fuse
of the identical electrical specification.
-
In the event of a serious operational problem, shut down the appliance and contact
your retailer immediately.
-
The bodywork and lenses must be replaced if they are visibly damaged.
-
Use the original packaging if the appliance needs to be shipped.
-
It is forbidden for safety reasons to make any modification to the unit that has not
been specially authorised by the parties responsible.
Important: Never gaze directly at the light source! Do not use the
appliance in the presence of epilepsy sufferers.
LASER SAFETY INSTRUCTIONS:
-
According to regulation EN/IEC 60825-1 Ed2, 2007-03, this laser belongs to class
3B. Direct exposure of the eyes to the beam can be hazardous.
DANGER: LASER RADIATION!
Avoid exposing the eyes directly to the laser! Laser radiation can
damage the eyes and/or skin. All protection measures are to be
enforced for safety reasons.
-
This product emits laser radiation at wavelengths ranging from 400 to 700 nm, and
produces lighting effects intended to scare birds off.
-
Light given out by lasers is unlike any other type of light source with which you are
likely to be familiar. The light given out by products of this type can cause damage
to the eyes if it is not controlled and used in an appropriate manner. The light from
a laser beam is thousands of times more concentrated than the light produced by
any other source of light. Such a concentration of light power can cause immediate
BIRD LAZZZER 16/11/2020
