Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 48 Monday, February 20, 2023 2:02 PM
48 MAINTENANCE
3
Remove the ezDispense reservoirs from the
drawer, and open the reservoirs lids.
• Rinse the drawer in warm water to dissolve
the detergent or softener scale.
4
Clean the outsides of the ezDispense
reservoirs and inserts with warm water.
• Use a soft cloth or brush to remove any
residue.
• Do not use soap when cleaning the drawer
and inserts.
5
If the detergent or softener is hardened inside
the ezDispense reservoirs, remove the covers
on the reservoirs, and clean the insides of the
reservoirs with warm water.
• Use a soft cloth or brush to clean and to
remove any residue.
• Do not use soap when cleaning the
reservoirs.
6
Securely close the covers on the ezDispense
reservoirs.
7
Wipe off any moisture with a dry towel or
cloth after cleaning.
8
Reassemble the reservoirs and reinstall the
dispenser drawer.
Cleaning the Door Seal
Clean the door seal once a month to prevent
build-up of dirt.
CAUTION
• Cleaning the door seal with undiluted bleach
may cause malfunction of the door seal and
washer parts. You must add water to the bleach
before using it.
1
Wear rubber gloves and protective goggles.
2
Dilute 3/4 cup (177 mL) of liquid chlorine
bleach in 1 gallon (3.8 L) of water.
3
Wipe around the door seal.
• Soak a sponge or a soft cloth in this diluted
solution and wipe all around the door seal.
4
Wipe up any moisture with a dry towel or
cloth after cleaning.
5
Leave the door open to allow the door seal to
dry completely.
