Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 26 Monday, February 20, 2023 2:02 PM
26 OPERATION-WASHER
Basic Options
Steam
Adding this option to a wash cycle helps provide
superior cleaning performance. Using steam gives
fabrics the cleaning benefits of a very hot wash.
• Swipe the bar to turn the option on or off.
• Steam may not be clearly visible during steam
cycles. This is normal. Too much steam could
damage clothing.
• Do not use steam with delicate fabrics such as
wool and silk, or easily discolored fabrics.
WARNING
• Do not touch the door during steam cycles. The
door surface can become very hot and can cause
severe burns. Allow the door lock to release
before opening the door.
• Do not attempt to override the door lock
mechanism or reach into the washer during a
steam cycle. Steam can cause severe burns.
ezDispense
Select this option to open the controls for the
ezDispense auto-dispense function. The available
options vary based on dispenser usage settings.
• Dispenser Usage: Select how to use the 2
dispenser tanks–detergent and softener, 2
different detergents, or the same detergent in
both tanks.
• Detergent Dispense: Set the amount of
detergent dispensed for each load.
• Softener Dispense: Set the amount of softener
dispensed for each load.
• Detergent in Use: When using the tanks for 2
different detergents, select whether to use the
detergent in tank 1 or tank 2.
• Detergent 1 Dispense: Set the amount of
detergent in tank 1 to dispense for each load.
• Detergent 2 Dispense: Set the amount of
detergent in tank 2 to dispense for each load.
• From the dispense screen, press the default
amounts button to change the default dispense
settings for all loads.
Extra Rinse
This option adds an extra rinse to the selected
cycle. Use this option to help ensure the removal
of detergent or bleach residue from fabrics.
• Press the Extra Rinse button to add up to 3
additional rinses to the cycle.
Delay Start
Once you have selected the cycle and other
settings, press the Delay Start button to delay the
start of the wash cycle.
• Press the Delay Start button to increase the
delay time in 30-minute increments, from 1 hour
up to 19 hours.
• Once the desired delay time is set, press the
Start/Pause button to start the delay time.
NOTE
• If the Start/Pause button is not pressed to begin
the delay time, the washer automatically turns
off after a certain time and all cycle settings are
lost.
Fresh Care
Use this function when you will not be able to
unload your clothes immediately after the wash
cycle ends.
• Swipe the bar to turn the option on or off.
• The drum will tumble periodically for up to 19
hours to prevent wrinkles.
More Options
TM
TurboWash
Adding this option reduces the cycle time while still
providing similar wash performance to the same
TM
cycle without TurboWash
• Swipe the bar to turn the option on or off.
• This option cannot be used with all cycles.
• For cycles in which TurboWash
automatically selected, the TurboWash
cannot be turned off.
• These cycles are designed for optimum
performance with the TurboWash
applied.
TM
Cold Wash
TM
Add the Cold Wash
option to save energy by
using cooler water. Wash and rinse times are
increased to maintain wash performance.
• Swipe the bar to turn the option on or off.
• Wash time will increase up to several minutes
with this option.
• For best wash results, only wash small loads (less
than 8 lb) with this option.
.
TM
is
TM
option
TM
option
