Idiomas disponibles
Idiomas disponibles
EN
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model No.
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Weight
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other bat-
teries could cause serious injury or damage the tool.
CD801AA
20V, 2Ah Lithium-Ion
CD803AA
20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD802AA
Quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2.
1. Cartridge holder
2. Plunger
3. Rack
4. Feed rate indicator lights
5. Feed rate increase button (+)
6
6. Feed rate decrease button (-)
CD801AA
7. Rack handle
Lithium-Ion
8. Trigger switch
20V
9. Battery
10. Battery unlock button
2.0 Ah
11. Battery LED indicators button
CD802AA
12. Battery LED indicators
0.3 kg
13. Charger
14. Charger LED indicators
CD802AA
3. ASSEMBLY
220-240V, 50Hz 0.4A
21V
2.5A
60 minutes
120 minutes
CD801AA, CD803AA
0.36 kg
Inserting the battery into the machine (Fig. B-1)
CD803AA
Ensure that the exterior of the battery is clean and
Lithium-Ion
dry before connecting to the charger or machine.
1. Insert the battery (9) into the base of the ma-
20V
4.0 Ah
2. Push the battery further forward until it clicks
CD802AA
0.65 kg
Removing the battery from the machine (Fig. B-1)
1. Push the battery unlock button (10).
2. Pull the battery out of the machine like shown
Checking the battery charging status (Fig. B-2)
• To check the battery charge status, push the
• The battery has 3 lights indicating the charge
• When the lights are not burning it means the bat-
Charging the battery with the charger (Fig. B-2)
1. Take the battery (9) from the machine.
2. Turn the battery (9) to upside down position and
3. Push the battery until it is fully pushed into the
4. Plug the charger plug into an electrical outlet
Remove the battery before carrying out any
work on the power tool.
The battery must be charged before fi rst
use.
chine as shown in Fig. B-1.
into place.
in Fig. B-1.
button (11) on battery shortly.
level, the more lights that burn, the more
charge the battery has left.
tery is empty and must be charged immediately.
slide it onto the charger (13) as shown in Fig. B-2.
slot.
and wait for a while. The LED indicators on the
charger (14) will lighten up and show the charg-
er status.
WWW.VONROC.COM
