BaByliss PRO 4rtists FXX3TBE Manual De Instrucciones página 6

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
ENGLISH
Please carefully read the
safety instructions before
using the appliance.
Adaptor
Vibrations
LpA (dB(A))
HIGH PERFORMANCE
TRIMMER
FXX3TBE
OPERATING INSTRUCTIONS
1. Before using the trimmer for the
first time, charge continuously
for 4 hours. Maximum battery
capacity will only be reached
after 3 charging and discharging
cycles.
2. Make sure the switch on the
trimmer is in the OFF position.
Connect the charging jack into
the receptacle on the bottom
of the trimmer. Plug the adapter
into an electrical outlet. The
charging indicator will light up
blue to indicate that the charging
has begun. Charging is complete
after 4 hours and all 4 bars lit
on the trimmer handle when
finished.
3. The adapter may become warm
while charging. This is normal.
4. Preserving
maintain the optimum capacity
CA82M
<2.5 m/s²
< 70
the
battery:
of the rechargeable battery, the
trimmer should be recharged
for 4 hours approximately every
6 months.
5. Make sure the switch is in the OFF
position when the trimmer is not
operating.
VERY IMPORTANT: Blades must be
cleaned and oiled on a regular basis
for proper functioning. Failure to
regularly clean and oil the blades
will void the warranty.
FOR DIRECT PLUG-IN OPERATION
Make sure the trimmer is off.
Connect charging jack into the
receptacle at the end of the
trimmer and plug the adapter into
the power outlet.
USER MAINTENANCE
INSTRUCTIONS
REPLACEMENT (REMOVAL) OF
THE BLADE SET
To remove the blade set from your
trimmer, make sure the trimmer
is in the OFF position. Remove
the blade set by loosening the 2
blade screws. Once the screws are
loose, you will be able to easily
remove the blade set. Replace the
blade set by placing into position
and tightening the 2 screws
to
6
loading