Mounting Diagram; Floor Mounting - Iluminarc ILUMIPANEL ML Guía De Referencia Rápida

EN
Mounting
Before mounting this product, read the

Mounting Diagram

Overhead Mounting
Beam-shaping Filters
The Ilumipanel ML can be used with the medium, wide, very wide, or asymmetrical beam-shaping filters and a milky filter
(all filters sold separately by Iluminarc). Follow the instructions below to install the optional filters:
Filter retainer lid
Screws
1. Detach the filter retainer lid by removing the screws attaching it to the fixture.
2. Place the beam-shaping filter on top of the lenses. Ensure the glossy side of filter is facing OUT.
3. Place back the filter retainer lid on top of the beam-shaping filter.
4. Screw the filter and the retainer lid back in place.
3
QUICK REFERENCE GUIDE
Safety Notes. Use at least one mounting point per product.
Beam-shaping filter

Floor Mounting

Ilumipanel ML QRG Rev. 6