Idiomas disponibles
Idiomas disponibles
How to Disassemble
How to Assemble
1. While holding Coffee Reservoir
Lid, push long end of Straw
through opening in center of Lid
shorter end of Straw in opening
closest to Dispensing Lever.
6
NOTE: Remove all plastic packing materials from Coffee Maker. Remember to recycle and read your Use
and Care manual.
1. While holding Coffee Maker
Handles, slide front of Coffee
Maker towards you to remove
from Base and place on
countertop.
Before first use: Wash Removable Grounds Filter Basket, Removable Brew Basket, Water Reservoir, Water Reservoir
Lid, Coffee Reservoir, Straw, and Coffee Reservoir Lid in hot, soapy water. Rinse and dry.
2. Insert Coffee Reservoir Lid onto
Coffee Reservoir. While holding
Lid Handle, turn clockwise from
unlock ( ) to lock ( ) to secure
into place.
2. Hold Coffee Reservoir Handles, lift up and place on countertop. Turn
Coffee Reservoir Lid counterclockwise from lock ( ) to unlock ( ) to
remove.
3. While holding Coffee Reservoir Lid, push up on bottom of Straw to lift
out of Lid.
3. Carefully, lift Handles and insert Coffee Reservoir into Front Housing,
aligning Coffee Dispensing Lever with opening on front of Front Housing
and Handles to the sides.
4. While holding Coffee Maker Handles, slide Front Housing onto Base.
5. Brew one cycle with water and discard water before brewing coffee.
6. Insert optional Water Filter into Water Reservoir. See Care and Cleaning
for direction.
