Snap the basically assembled fan into the
③
installed Bracket.
polarity (the color of the
if the color is the same).
Click!
House power
buckle
FAN
Step 3 (Receiver installation and wiring)
Connect the wires according to the polarity (the color of the
①
7
House power cord may be different if the color is the same).
AC IN N(Blue)
AC IN L(Brown)
Ground(Yellow/green)
Put the receiver into the
②
Bracket and arrange the wires
FAN
To Motor
L For light(Blue)
U(Pink)
N Neutral(White)
V(Gray)
W(Red)
Adjust the position of Canopy,
③
then lock it
8
Put the receiver into the
②
Bracket and arrange the wires
L marrón, marró, brown, marron,
marrone, castanho, braun, bruin,
Put the receiver into the
②
Bracket and arrange the wires
Adjust the position of Canopy,
③
House power
then lock it
Adjust the position of Canopy,
③
then lock it
FAN
.3.
9
Connect the wires according to the polarity (the color of the
①
House power cord may be different if the color is the same).
AC IN N(Blue)
AC IN L(Brown)
Ground(Yellow/green)
To Motor
L For light(Red )
U(Pink)
N Neutral(Blue)
V(Gray)
W(Red)
N azul, blau, blue, bleu, blu, azul,
Step 4
-
②
Put the receiver into the
②
Bracket and arrange the wires
House power
Adjust the position of Canopy,
③
then lock it
FAN
amarillo-verde, groc-verd, ye-
.3.
(Blades and
llow-green, jaune-vert, giallo-ver-
de, verde-amarelo, gelb-grün,
Align the blades with the mountin
①
and then fix them with screws.
Model LED:Loosen the screw of the lig
source cord buckle from the bottom of
fan to release the light source cord
10
Model LED:Loosen the screw of t
9
Assemb
faqs - www.faro.es
Light kit inst
Model LED
②
②
source cor
-
fan to relea
Step 5(Switch
S
