VALBERG CNF 310 D X625C Instrucciones De Uso página 11

B
7. Place the door body for the refrigerator compartment on the middle hinge, then install
the upper hinge to the other side of the cabinet, finally connect the terminals
signal wires at the side of the upper hinge and terminals
the hinge cover and hole cover.
Changing the light
• This product contains a light source of energy efficiency class F. Light source in this
product can only be replaced by qualified professionals. Please contact after-sales service
if the light source fails. The light source shall be removed at the end of the product's useful
life, with sorting and recycling done separately.
Using the appliance
2
1
1. Please take out the plug before removal.
2. Remove the lampshade with a screwdriver.
3. Take down the lamp panel.
4. Remove the connection terminal.
10
4
3
, on the other side and cover
4
3
EN
2
, for the
1