VALBERG CNF 310 D X625C Instrucciones De Uso página 10

B
5. Dismantle the screws, sleeve pipe and stopper on the lower end cover of the two door
bodies, and install them successively on the other side of the door bodies (the stopper needs
to be replaced from the additional bag). Then remove the upper end cover of the cooler door
and switch the wire harness with a sleeve pipe to the other side of the door body. Finally
install the sleeve pipe of the upper hinge on the cooler door in the hole on the other side of
upper end cover of the cooler door.
6. Put the freezer door on bottom hinge, install the middle hinge, the screws and the screw
hole caps.
middle hinge
(The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor)
Using the appliance
screw
9 EN
sleeve pipe
stopper
screw
hole cap