Technical Data; Inserting/Replacing The Battery - Flex DGE 25 18.0-EC Instrucciones De Funcionamiento

DGE 25 18.0-EC

Technical data

Tool
Type
Rated voltage
No-load speed
Collet
Carbid burrs (max.
diameter)
Mounted points
(max. diameter)
Mounted flap
wheels
(max. diameter)
Cutting discs (max.
diameter)
Abrasive grinding
body diameter
max.
Weight according
to"EPTA
Procedure
01/2003"
(without battery)
Battery
Weight of battery
- 2.5Ah
- 5.0Ah
Charging time
(depending on
state of charge)
- AP 2.5
- AP 5.0
Working
Temperature
Storage
Temperature
Charging
Temperature
DGE 25 18.0-EC
straight grinder
Vdc 18
r.p.m 10000-25000
6
mm
6.35 (1/4") ( sold
mm
seperately)
mm
8 (Sold separately)
mm 16
mm 32
mm 30
mm 50
mm 32
kg 1.5
AP
AP5.0
2.5
kg 0.4
kg 0.7
min 0-40
min 0-45
-10 － 40℃
-40 － 70℃
4~40°C
Overview (see figure A)
The numbering of the product features refers
to the illustration of the machine on the
graphics page.
1 Collet (SW17)
2 Clamping nut
3 Spindle button
4 Handle
Insulated gripping surface
5 Speed-selection button
6 On/off switch
7 Filter cover
8 Open-ended spanner
Operating instructions
WARNING!
Remove the battery before carrying out any
work on the power tool.
Before switching on the power
tool
Unpack the cordless straight grinder and
check that here are no missing or damaged
parts.
N OTE
The batteries are not fully charged on
delivery. Prior to initial operation, charge the
batteries fully. Refer to the charger operating
manual.

Inserting/replacing the battery

(see figure B & C)
WARNING!
Before inserting the battery, make sure that
the product is switched off.
■ Press the charged battery into the power
tool until it clicks into place (see figure B).
19