Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Tuned to the surface being processed, the machine
can be equipped with three sanding pads of differ-
ent hardnesses.
Hard: Coarse and fine sanding on surfaces. Sand-
ing edges.
Soft: Universal for coarse and fine sanding, for flat
and convex surfaces.
Extra-soft: Fine sanding of moulded parts, arches,
radii. Do not use on edges.
Please observe all mentioned safety informa-
tions and the following rules when working:
– Always secure the workpiece in such a manner
that it cannot move while being processed.
WARNING
Risk of injury
The machine should always be disconnected
from the compresses air supply before any work
is carried out on the machine.
All maintenance and repair work which requires
the motor casing to be opened may only be car-
ried out by an authorised service centre.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at:
www.festoolusa.com/service
EKAT
4
Use only original Festool spare parts!
Order No. at:
5
3
2
www.festoolusa.com/service
1
10
All manuals and user guides at all-guides.com
Attaching sanding accessories using Stick-
The suitable StickFix sandpaper and StickFix sand-
ing cloth can be attached quickly and simply to the
StickFix sanding pad.
Working with the machine
Service and maintenance
We recommend that the vanes on the motor be re-
placed after approx. 500 operating hours.
The rubber sleeve [5-1] brushes off the sanding
pad and prevents uncontrolled turning of the sand-
ing pad. This must be replaced if the braking effect
decreases.
Fix
Press the self-adhesive sanding accessory onto
the sanding pad [4-1].
For work that generates dust, wear a dust
mask.
Vanes
Sanding pad brake
5.3
5.4
5.2
5.1
5
Tabla de contenido
