Installation; Removing The Top Cover - Alpine HDA-M80 Manual De Operación

INSTALLATION

Due to the high power output of the HDA-M80/
HDA-F60/HDA-V90 considerable heat is produced
und to
when the amplifier is in operation. For this reason,
ing
the amplifier should be mounted in a location
s in
which will allow for free circulation of air, such as
pment
inside the trunk. For alternate installation locations,
y, and it
please contact your authorized Alpine dealer.
ordance
1. Attach the mounting legs to the bottom of the
amplifier with 8 screws.
nit in
e is
anty,
which
2. Make sure there are no objects behind the
d States
surface that may become damaged during
r dealer
drilling.
ge.
3. Drill the screw holes.
4. Position the HDA-M80/HDA-F60/HDA-V90 over
the screw holes, and secure with 4 self-tapping
screws.
..............4
..............2
..............8
..............1
..............1
..............2
..............3
......1 SET
Mounting legs (×2) (included)
Screws (×8) (included)
(e.g. HDA-V90)
Self-Tapping Screws (×4)
(included)
Holes (×4)
(e.g. HDA-V90)
ALPINE HDA-M80/HDA-F60/HDA-V90 68-44781Z25-A (EN/DE/FR/ES/IT/SE/RU/CS)
REMOVING THE TOP
COVER
To use the top inner panel, remove the top cover.
Top cover
Hexagon wrench
(included)
(e.g. HDA-V90)
3
-EN
EN
DE
FR
ES
IT
SE
RU
CS