Lamborghini Caloreclima ALHENA TECH C Serie Instrucciones De Uso, Instalación Y Mantenimiento página 334

Fault code Fault
Too many SW errors or error
A98
occurred during board replacement
Generic error
A99
Communication fault between display
F99
and control unit
334
EN
Possible cause
Board replacement
Fume ducts obstructed.
Low gas pressure.
Condensate trap blocked.
Fumes recirculation or com-
bustion problem.
PCB hardware or software
error
Connection cable interrupted
or not inserted
Misalignment of parameters
between control unit and dis-
play
Factory values reset
cod. 3541V512 - Rev 00 - 07/2022
ALHENA TECH C
Cure
Reset the fault and do the Calibration proce-
dure [ ].
AUTO SETUP
Initially solve the problem, reset the fault and
check correct ignition.
Do the Calibration procedure [
Replace the board if necessary.
Reset the fault and check for correct ignition.
Do the Calibration procedure [
the problem persists, replace the board.
Check the connection
Turn the power off and on
Turn the power off and on
].
AUTO SETUP
]. If
AUTO SETUP