Genius SW-2.1 350 Guía Rápida página 5

Connecting the SW-2.1 350 Speakers
1. Place the speakers next to the monitor, one on either side.
2. Connect the AC power cord (A) to a suitable AC outlet.
3. Plug the satellite speaker cables (B) into the host speaker "OUTPUT"
RCA jacks.
4. Insert the 3.5mm plug (green) of the audio cable (C) into the sound card or
other audio source.
Control Function
1. Power/Volume:Turn the Volume button to turn on/off the system power
and to control the volume level.
2. Bass:Controls speaker's bass level.
3. Treble:Rotate the treble control to increase/decrease the sound response.
4. Line In Jack:Accepts a 3.5mm stereo mini-plug from MP3 or other stereo
devices.
Warning
1. Do not connect the power plug into an AC outlet until all connections
are made.
2. Remove AC power cord if you do not use this device for a long time.
3. Do not expose the speakers to any dripping or splashing and make
sure no object filled with liquids, such as vases, etc., are placed on
them.
ENGLISH