Instruction Sheet; Changing The Fuse - 3B SCIENTIFIC PHYSICS 1000701 Manual De Instrucciones

3B SCIENTIFIC ® PHYSICS

Instruction sheet

06/16 TLE/ALF
1. Description
The vibration generator is used for generating
mechanical waves to study oscillations and reso-
nance.
The vibration generator consists of a loudspeaker
fitted inside a stable plastic housing. A mounting
pin with a 4-mm socket is attached to the speaker
to transmit the oscillations.
Springs, Chladni plates, rubber bands and other
accessories can be attached to the vibration gen-
erator and allowed to oscillate. A function gener-
ator with a power output (e.g. function generator
FG 100 1009956/1009957) is required to gener-
ate the oscillations. Including holder for stand rod
(up to 8 mm Ø) on the rear side of the apparatus
for the demonstration of standing waves in a coil
spring. The generator is equipped with overload
protection.
2. Technical data
Connection: via 4-mm safety sockets
8 Ω
Impedance:
Frequency range: 0 up to 20 kHz
Overload protection: 1 A fuse
Dimensions: 200 x 160 x 75 mm
Weight: 1.4 kg
Vibration Generator 1000701
3
1 Input sockets (4-mm safety
sockets)
2 Mounting pin with 4-mm socket
3 Fuse holder (with F 1.0 fuse for
250 V)
3. Operation

When plugging in or removing accessories,
take care not to apply too much pressure or
force on the mounting in order to avoid dam-
aging the loudspeaker.

Hold the mounting still with one hand whilst
inserting or removing the accessory with the
other.

Attach appropriate accessories for the exper-
iment to the vibration generator.

Connect a function generator and modify the
frequency.
To perform experiments the following equipment
is also required:
1 Function generator FG 100 @230 V
or
1 Function generator FG 100 @115 V
Experiment leads

3.1 Changing the fuse


Unscrew the fuse holder.

Replace the blown fuse with a new one.

Screw the fuse holder back in.
1
1009957
1009956