Technical Data; Maintenance/Care - Würth ERGOPOWER COMPACT 5+2W LED Traducción De Las Instrucciones De Uso Originales

Technical data

Art.
Number of LEDs:
Operating voltage
power supply unit:
Lamp input voltage/
current consumption:
Charging time:
Operating time
Operating time
Operating time (spot light):
LED intensity
(
LED intensity
(
LED intensity (spot light):
Service life of LED:
Degree of protection:
Storage temperature:
Operating temperature:

Maintenance/care

Visual inspection before starting work
The device is maintenance-free. The lamp and its
accessories must nevertheless be checked for external
damage before each use.
The device may not be used when damage
is visible. It must be repaired or disposed of by a
commissioned and trained person.Please contact
your Würth branch.
Cleaning
Cleaning work may only be performed when the
been disconnected.
Clean the device by wiping it with a soft, clean
cloth. Remove stubborn dirt with a moistened cloth
and a common household cleaner. Using cleaning
agents that are abrasive or contain alcohol or solvent
will damage the housing.
0827 940 24X
+1,5+2W
Li-Ion, 3.6V,2100mAH,
7.56Wh
100-240 V～ 50 60 Hz
5 V 1 A
approx. 4 hours
: hours
2 hours
:
5 hours
2 lm
):
: 450 lm
)
150 lm
up to 10000 hours
IP 65
–20 °C to +50 °C
–10 °C to +40 °C
Disposal
Do not dispose of the device with domestic
waste!
Small electrical devices and packaging
must always be recycled in an environ-
mentally appropriate manner.
Electrical tools that are no longer usable
must be separately collected and for-
warded for environmentally appropriate recycling
according to the European Directive 2012/19/EU.
Warranty
(proof by invoice or delivery note) for this device.
A damaged machine is either repaired or replaced
with a substitute machine. Damage resulting from
improper handling is excluded from the warranty.
Complaints can only be accepted if the device is
handed over assembled to a Würth branch, your
Würth sales representative or a Würth-authorised
customer service centre.
9