Before Installation - Mitsubishi Electric MAC-497IF-E Manual De Instalación

2. Before Installation

2.1. How to Use the MA Interface
I Functions
Use as wired remote controller (Fig. 2-1)
You can use the MA remote controller as a wired remote controller.
I Sample System Configuration
3
2.2. Parts
Before installing the unit, make sure that you have all the necessary parts.
Interface unit [with connecting cable
–
(5-core) and screw]
Mounting cord clamps
—
Screws for mounting 3.5 × 12
˜
(Use them to fix the interface holder
Cable ties
™
Remote control cable
(for connecting the MA
Remote Controller)
* Please use cable with supplementary insulation.
Use wires which have insulation more than the max. voltage.
Max. voltage is defined according to the law of the country where the interface is used.
1
Fig. 2-1
Accessory
)
œ
Item to be Prepare at the Installation Site
2-core sheath cable 0.3 mm
MA Interface
1
2
Indoor Unit
2
MA remote controller
3
1
Fasteners (for joining the wires)
š
Screws for mounting 4 x 16
1
›
(Use them to fix the cord clamp
2
Interface holder
œ
3
to 1.25 mm * [AWG 22 to 16]*
2 2
3
1
)
—
1
3