General Safety Requirements - Melchioni Family PERFETTO Manual Del Usuario

GB

GENERAL SAFETY REQUIREMENTS

Carefully read the requirements in this manual and keep in a safe place.
It contains important instructions on the safety, use and future of your appliance.
This appliance is only (or domestic use and must only to be used for the purpose it was specifically
designed: and that is for the ironing of fabrics.
Any other use is to be considered improper and therefore dangerous. The constructor cannot be held
responsible for eventual damages occurring from improper, wrong and unreasonable uses. The installation
must be effected as by the constructors' prescriptions. A wrong installation con cause damages to persons,
animals and things. The constructor cannot be help responsible of this. The safety of the electric appliances
is guaranteed only if these are connected to an electric network supplied with suitable earthing as by what
has been agreed upon by the actual standards in force concerning the electric safety.
The packing elements (plastic bags, nails, expanded polystyrene. etc...) must not be left at reach of children
or disabled as they represent a potential source of danger.
Before connecting the appliance make sure that the data on the rating label ore the some as the mains
supply of your home.
In case of incompatibility between the socket and the plug contact qualified personnel in order to effect the
necessary changes
In general the use of adaptors, multiple sockets and/or extensions ore unadvisable.
If their use is absolutely necessary use only materials in conformity with the laws in force concerning the
safety and having the requirements of compatibility with appliance and electric network.
The use of any electric appliance requires the respect of a few fundamental rules and in particular:
• Do not immerge the appliance in water.
• Do not touch the appliance with wet or damp hands
• Do not use the appliance barefooted
• Do not unplug the appliance by pulling on the appliance or the cable - always use the plug itself.
• Do not leave the appliance exposed to atmospheric agents (rain, sun).
• We recommend to not leave the appliance at the reach of children or disabled and do not allow them to use
it.
• Always disconnect the plug from the socket when it is not used or before effecting any cleaning or
maintenance operation.
The feeding cable must always be unrolled for all its length. This in order to avoid overheating. In case of
damaged feeding cable, foresee to the replacement, which must be effected by qualified personnel.
In case of damage and/or bad functioning turn off the appliance and contact qualified personnel.
Any tampering or operation affected by unqualified personnel make you loose the right of guarantee.
• Before using the iron for the first time, make sure that you have removed all the labels or protection films
from the plate. Clean the plate using a soft cloth.
• Some parts of the iron are slightly lubricated and therefore the appliance, at the moment of the first lighting
up, could give out a bit of smoke. This smoke will stop in a short time.
• Always keep the ironing plate "B" always smooth; do not make it slide on metallic objects (ex. Iron support
grid, metal buttons, zippers, etc..)
• Do not leave water in the machine when the room temperature is 00 C or below.
• Do not fill the appliance under a running top.
• Do not allow the supply cable to come into contact with the ironing plate.
• Do not overfill the water tank and do not add stainremovers or similar products to the water.
• The boiler must never be moved during operation.
• Never unscrew the boiler cap when the appliance Is connected to the power supply network.
• Use a funnel to fill the boiler without causing the water to overflow.
• The boiler must be placed on a flat surface that is particularly resistant to high temperature. After each use,
wait until the iron is completely cold and always empty the reservoir from remaining water.
ATTENTION:
The anti-limestone cleaning effected by service centres is not covered by the guarantee it is
therefore at charge of the customer.
ATTENTION:
Only pour distilled or demineralised water into the tank.
ATTENTION: NEVERUSETAPWATER
Tap water with impurities and limescale deposits may obstruct the holes of the plate