Control Panel - Danby Designer DDEF03813BD13 Manual Del Propietário

OPERATING INSTRUCTIONS

CONTROL PANEL

1. Timer indicator light: Illuminates when the timer is active.
2. Display panel: Shows the set temperature.
3. High heat mode indicator: Illuminates when high heat mode is active.
4. Low heat mode indicator: Illuminates when low heat mode is active.
5. Power button: Used to turn the fi replace on or off.
6. Mode button: Used to set the desired mode; low heat or high heat.
Press and hold for 3 seconds to change between °F and °C.
7. Flame colour button: Used to turn the fl ame on or off. Used to change
the colour of the fl ame.
8. Timer button: Used to set the timer feature. Press the timer button
repeatedly to set the number of hours that the fi replace should run
before turning off. The timer can be set between 0 and 12 hours
and can be adjusted in 1 hour increments. The timer indicator light
will remain illuminated while the timer is active. The fi replace will
automatically turn off when the timer reaches zero.
9. Up and down buttons: Used to increase or decrease the set
temperature.
5
1
6
2
7
9
5
3
4
8