Magnat MONITOR S 80 ATM Manual De Instrucciones página 9

MAGNAT MONITOR S 14 C, S 12 C
The MONITOR S 14 C and S 12 C center speaker visually and acoustically ideally matches the other
MONITOR S models. The loudspeaker is placed immediately on or under the television set. Otherwise
please adhere to the general recommendations outlined in the previous chapters.
MAGNAT MONITOR S 10 D
The MAGNAT MONITOR S 10 D was specially developed for use as a rear speaker in home cinema
systems. The special arrangement and wiring of the three tweeters offers a particularly spatial sound
impression and can also be used as rear/effect speakers at a short listening distance.
The ideal position for the speakers is either to the side or to the right and left behind the listening position.
The two speakers should be of equal distance from the listening position. The speakers should be
positioned at ear level or slightly above, or mounted on the wall.
MAGNAT MONITOR S 10 B, S 10 D WALL MOUNTING
Both models are equipped with a simple wall-mounting device that allows the speaker to be hung on a
wall-mounted screw. Fig. 4 provides information about the screw spacing and the screw dimensions.
Important information/safety instructions:
The customer is solely responsible for the use of wall brackets / speakers attachments.
The customer is also solely responsible for the secure attachment of the speaker bracket to the wall
and the selection of suitable mounting material (e.g. screws, wall plugs, etc.), while taking account of
the weight and construction of the speaker and the condition of the wall.
MAGNAT MONITOR S 10 B, S 10 D RUBBER FEET
The package includes four self-adhesive rubber feet per speaker, which should be glued to the underside
of the housing when placed on a hard surface (e.g. shelf). When mounting on a wall, these can also be
attached to the rear of the speaker in order to avoid resonance and ensure the necessary distance from
the wall for laying the cable.
MAGNAT S 80 ATM
2.5-way bass reflex floorstanding speaker with integrated 2-way Dolby Atmos ® module
About DOLBY ATMOS ® : DOLBY ATMOS ® is a new audio standard for cinemas and home cinemas.
Atmos brings a third dimension into the soundscape for the first time in the form of treble channels. The
treble channels are emitted either by additional add-on loudspeakers or via add-on speakers integrated
into the front and rear loudspeakers like the MONITOR S 80 ATM. For even distribution of the treble sound
field that is not locatable for the human ear, the add-on loudspeakers emit their sound into the room in
the direction of the ceiling. The reflection of this sound then reaches the listeners, giving the impression
of a three-dimensional soundscape. The use of on-wall or in-wall ceiling loudspeakers is also possible
as an alternative for emitting the treble channels. However, this involves considerably greater effort and
expense in terms of installation and wiring.
Atmos-certified loudspeakers therefore represent a simple and practical possibility for expanding an
existing multi-channel loudspeaker set to include Atmos channels. Please note that, for a true DOLBY
ATMOS ® experience, both the source material (e.g. Bluray) and the electronics (e.g. AV receiver) have
to meet the DOLBY ATMOS ® audio standard.
9