Handling Of The Unit; Handling Of The Unit With Forklift; Manual Handling Of The Unit - Olimpia splendid SHERPA SHW S1 200 Manual Del Usuario

9.3 HANDLING OF THE UNIT

As a genral rule, the unit must be stored and/or handled in its shipping packing box in upright position and should be empty
without water charge. During the transport (if done with care) and the storage, it's advisable to not exceed an inclination angle of
30 degrees max. Ambient temperatures of -20 to +70 degrees Celsius are permitted.

9.3.1 Handling of the unit with forklift

When using the forklift for handling, the unit must remain mounted on the pallet. The lifting rate should be kept to a minimum.
Due to its top-heaviness, the unit must be secured against tipping over. To prevent any damage, the unit must be placed on a level
surface.

9.3.2 Manual handling of the unit

For the manual handling, the wooden pallet can be used. Using ropes or carrying straps, a second or third handling configuration is
possible. With this type of handling, it is advised that the maximum permissible inclination angle of 45 degree is not exceeded.
If transport in an inclined position cannot be avoided, the unit should be taken into operation one hour after it has been moved
into final position.
Due to the high center of gravity, low overturning moment, the unit must be secured against tipping over.
The cover of the unit cannot withstand stress, so it cannot be used for transport.
The unit can be inclined only on the opposite side of the handle (see above drawing), in other words only on the left
Warning:
side respect of the control panel.
The unit is equipped with a handle to make easy the transport. The handle is supplied unassembled: in case of need, it shall be
fixed with two M8 screws to the two threaded inserts.
M8 inserts
Handle
15