Purposes And Contents Of This Manual; How To Keep This Manual; Graphic Symbols Used In The Manual; Safety Laws - Olimpia splendid SHERPA SHW S1 200 Manual Del Usuario

The heat pump manual contains all the necessary information for the better use of the equipment under safety conditions for the
operator.

1 PURPOSES AND CONTENTS OF THIS MANUAL

This manual provides basic information as for the installation, the operation and the maintenance of heat pump units. It is
addressed to machine operators and it enables them to use the equipment efficiently, even if they do not have any previous
specific knowledge of it.
This manual describes the characteristics of the equipment at the time it is being put on the market; therefore, it may not capture
later technological improvements introduced by the company as part of its constant endeavour to enhance the performance,
ergonomics, safety and functionality of its products.
The company, therefore, is not constrained to update the manuals for previous versions of machines.
It's recommended that the user must follow the instructions contained in this booklet, especially those concerning the safety and
routine maintenance.

1.1 HOW TO KEEP THIS MANUAL

The manual has to be always kept with the unit it refers to. It has to be stored in a safe place, away from the dust and moisture. It
has to be accessible to all users who shall consult it any time they are in doubt on how to operate the equipment.
The company reserves the right to modify its products and related manuals without necessarily updating previous versions of the
reference material. It assumes no responsibility for any inaccuracies in the manual, if due to printing or transcription.
The customer shall store any updated copy of the manual or parts of it delivered by the manufacturer as an attachment to this
manual.
The company is available to give any detailed information about this manual and to give information regarding the use and the
maintenance of its own units.

1.2 GRAPHIC SYMBOLS USED IN THE MANUAL

Indicates operations that can be dangerous for people and/or disrupt the correct operation of the equipment.
Indicates prohibited operations.
Indicates important information that the operator has to follow in order to guarantee the correct operation of the
equipment in complete safety. It indicates also general notes.

2 SAFETY LAWS

The pump units have been designed in compliance with the following Directives and Harmonised Norms:
• Community Directives: 2014/30/UE, 2014/35/UE; 2011/65/UE, 2012/19/UE;
• Norms: EN 60335-2-21; EN 60335-2-40; EN 55014-1; EN 55014-1 ; EN 61000-3-2; EN 61000-3-3.;
And the following directives, regulations and regulations about eco-friendly design, energy labeling and promotion of the use of
energy from renewable sources:
• Community Directives 2009/125 / UE, 2009/28 / CE;
• EU Regulations n. 1907/2006; 812 / 2013 and 814/2013;
• UNI EN 16147: 2017 standard.

3 PERMITTED USE

The company excludes any contractual and no-contractual liability for damage caused to persons, animals or things, by
•
incorrect installation, adjustment and maintenance, improper use or a partial or superficial reading of the informations
contained in this manual.
• These units have been designed for water heating. A different application, unless expressly authorized by the manufacturer, is
to be considered improper and therefore not allowed.
The location and the hydraulic and electric plant should be determined by the system designer and must take into account
•
both the purely technical needs as any applicable local legislations and specific authorizations.
• The execution of all work must be performed by qualified and experienced personnel, competent in the existing rules in
different countries
5