Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Step 5. Allow branches to fall into place or gently pull branches up and
out. When adjusting branches be sure that all wires are free of
branch hinges. (See Fig. 8)
Step 6. Shape the branches. Starting with tips closest to the pole,
shape one tip to the right, one to the left and one at the center
of the main stem. Repeat pattern for each branch. (See Fig. 9)
Step 7. Plug the power cord from the tree section (C) into a proper
outlet.
Step 8. Please note this tree comes with a control box for easy
illumination and changing functions. This tree is Color Changing,
the 4 lighting options available are:
1. Warm White Color Steady On
2. Multicolor Steady On
3. Color Changing
4. Off
Operation
Turning on the tree
Step 1. Plug the well connected power cord from the tree section (C)
into a proper outlet.
Instructions of Control box
Please note this tree has a control box
Press the button on the control box, select from the
following corresponding lighting functions:
Function 1: Warm White Color Steady On
Function 2: Multicolor Steady On
Function 3: Color Changing
Function 4: Off
User Servicing Instructions
Replace the fuse.
a) Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
b) Open fuse cover. Slide open fuse access cover on top of
attachment plug towards blades.
c) Remove fuse carefully.
d) Risk of fire. Replace fuse only with 3 Amp,
125 Volt fuse (provided with product).
e) Close fuse cover. Slide closed the fuse access cover on top of
attachment plug.
f) Risk of fire. Do not replace attachment plug. Contains a safety
device (fuse) that should not be removed. Discard product if the
attachment plug is damaged.
Replace the lamp.
a) Grasp plug and remove from the receptacle or other outlet device. Do
not unplug by pulling on cord.
b) Unlock the burned out LED lamp by lifting the hook and pull lamp and
plastic base straight out of lampholder. Do not twist lamps.
c) Replace lamp with only 3.0 Volt, 0.06 Watt, LED type lamp (provided
with product).
d) Lock the LED lamp.
CAUTION
To reduce the risk of overheating, replace burned-out lamps promptly.
1.
Use 3.0 Volt, 20 mA LED lamps only.
Risk of fire. This product does not contain lamp shunts, which allow the
2.
product to operate if one lamp burns out. Replace lamps only with the
spare lamps provided with this product.
If the new lamp base does not fit in lampholder, follow the steps below
before step c.
1. Pull the reflector out.
2. Remove the base of burned out lamp by straightening lamp leads
and gently pull lamp out.
3. Thread leads of new lamp through
holes in old base with one lead in each
hole (always match the long lead of
new lamp to the hook of lamp base).
4. After lamp is fully inserted into base, bend each lead up, like other
lamps in the light set so that the leads will touch the contacts inside
the lampholder.
5. Insert the reflector into the base.
CAUTION! –
ALWAYS UNPLUG YOUR TREE FROM ITS
POWER SOURCE BEFORE ATTEMPTING EITHER FUSE OR LAMP
REPLACEMENT.
Use and Care Instructions
a) Before using or reusing, inspect product carefully. Discard any
products that have cut, damaged, or frayed wire insulation or cords,
cracks in the lampholders or enclosures, loose connections, or
exposed copper wire.
b) When storing the product, carefully remove the product from
wherever it is placed, to avoid any undue strain or stress on the
product conductors, connections, and wires.
c) When not in use, store neatly in a cool, dry location protected from
sunlight.
Care and Cleaning
Step 1. Remove all ornaments and decorations.
Step 2. Unplug the cord from the wall outlet and then disconnect each
section of the tree. Remove the power cords from the tree
bottom (C).
Step 3. Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
Step 4. Repeat this step for the center and bottom tree sections.
Step 5. Carefully place all tree sections into a shipping box and tape it
shut.
Step 6. Store your tree in a cool, dry place away from sunlight.
Tabla de contenido
