Novellini EON A-2P-GF-R Manual Del Usuario página 68

PRODUCT GUARANTEE:
The product is guaranteed as per Italian Presidential Decree 224 of
24/05/1988 in Italy and the rest of the EU and as per CEE Directive
85/374 in terms of product liability.
The Manufacturer guarantees its products against manufacturing and
material defects – provided these are confirmed by the authorised
personnel of the Company – for a period of 24 months from the
purchase date, as indicated by the receipt or invoice.
The guarantee covers repairs to and/or replacement of the parts
considered to be faulty. The guarantee does not cover complete
replacement of the product. The guarantee does not cover expendable
materials, the replacement of pieces subject to normal wear as a result
of use, such as "lights, warning lights, fuses, glass parts, mirrors and
decorative parts unless these are faulty due to production defects and
not due to neglect or improper use", any parts and components which
are faulty or damaged due to negligence or carelessness during use,
incorrect installation or maintenance, operations carried out by non-
authorised personnel, and damage caused during transport or any
other circumstances not due to product manufacturing defects, such as
sudden power hikes, lightning, electrolysis and corrosion. Furthermore,
the guarantee does not cover all the parts and components of the mixer
and the boiler unit damaged or worn due to causes deriving from and
attributable to the nature of the water or electrical or water supply
systems of the home.
The Purchaser must check that the product is not damaged in any way
before installation and must contact the agent or authorised assistance
centre immediately if any faults are detected. The guarantee will only be
applied on presentation of a document indicating the purchase date.
In the event of operations without proven defects or to illustrate how
to use the product, all the expenses are sustained by the Purchaser. Any
repairs or modifications carried out by personnel not authorised by the
Manufacturer will not be covered by the guarantee and will render the
remaining guarantee period immediately null and void.
The Manufacturer is not responsible in any way for any direct or indirect
damage caused to persons, animals or things due to failure to comply
with all the regulations in the installation, instruction and maintenance
manual supplied with the product.
Any disputes will be dealt with exclusively by Mantova Italy, Law Court.
WATER TREATMENT
• The hardness of the domestic water supply affects the operation and
the cleaning frequency of the thermostatic mixer.
• In case of water with hardness above 15°f an antiscale device is
recommended. The choice of device should be made according to the
characteristics of the water supply.
This symbol indicates important product instructions or
important safety information.
IMPORTANT:
Before you start to assemble and install the product, carefully read
through all the instructions. Unpack the components and check that
nothing is missing and that there are no damaged or faulty components,
remove the transparent protective film. Before you install the shower
cubicle in its final position, perform a test run. Run the unit for several
minutes and check for water leaks and any damage caused during
transport and handling. This product should be installed by suitably
skilled personnel.
N.B.: This product is designed for installation on finished walls and floors.
Warranty claims must be produced with the purchase invoice and the
product assembling instructions.
The drawings and illustrations in this manual are provided for
information purposes only.
The manufacturer reserves the right to make changes and improvements
without prior notice.
Dismantling the shower valves:
In the event of the formation of lime scale and a resulting malfunctioning
of the shower valves, dismantle the parts (fig. A/B/C...). We recommend
you immerse the cartridge in normal vinegar until it is completely lime
scale-free.
To ensure correct operation of the thermostatic mixer, the unit must
be supplied from a boiler or a water heater providing 6 to 7 litres per
minute of water at a temperature of 60/65°C.
INSTRUCTIONS FOR USE:
electrocution Hazard. Do not use electrical equipment of any type
inside the shower enclosure when the shower is operating.
Massage functions:
FIXED SHOWER HEAD.
HYDRO-NECK.
HYDRO-BODY: for a total body massage concentrating on the spinal
column. Relieves back pain, tiredness and muscular aches. Ideal for
reducing physical stress.
CLEANING THE SHOWER UNIT:
CARING FOR YOUR CUBICLE
The cubicle panels are made with acrylic parts and must be cleaned
using a liquid detergent and a soft cloth or sponge. Use a good quality
household liquid detergent. To prevent scale deposits, wipe dry using
a chammy leather or a soft lint-free cloth that removes stubborn
deposits without leaving traces. Limescale deposits may be removed
using specific detergent products. To restore shine to the acrylic surface
polish with an ordinary wax polish such as car wax.
DO NOT USE ABRASIVE CLEANERS, ALCOHOL OR ALCOHOL BASED
PRODUCTS, ACETONE OR OTHER SOLVENTS.
TROUBLESHOOTING:
Before calling the Service Centre, check that:
• The hoses are properly connected and not kinked.
• Hot and cold water is being correctly delivered to the wall fittings.
• The water supply system was bled before the shower unit was installed.
If you have followed the instructions and the shower still does not work,
call the nearest Service Centre. The telephone numbers of authorised
service centres are given in the enclosed list.
WASTE DISPOSAL:
To dispose of the shower unit or any part of it, follow local waste disposal
regulations. In Italy, Legislative Decree No. 22 of 5 February 1997 applies.
In other EU countries, the subject is governed by directives 91/156/EEC,
91/689/EEC and 94/62/EC.
-68-
ENGLISH
Romanore di Borgo Virgilio, lì 01.01.2014
Novellini S.p.a.
Marco Novellini
Amministratore delegato