SEVERIN WKS 8894 Instrucciones De Uso página 16

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
This heat is caused by dissipation of the heat generated
inside the cabinet.
∙ The following table lists possible malfunctions,
their probable causes and solutions. In the event of
Problem
The appliance is not working at all.
The temperature inside the
compartment is not low enough.
The normal operating sound
changes or becomes louder.
Water is collecting on the bottom
of the unit.
Transporting the appliance
∙ To prevent damage to the unit during transport, ensure
that all accessories and components inside and around
the appliance are securely fastened.
∙ The unit must only be transported in its vertical position;
do not tilt any more than 30°.
∙ Then you can turn it on again after 4 hours. If the
appliance has been tilted by more than 30° during
transport, wait for about 24 hours before connecting it
to the power supply and turning it on after it has been
positioned.
Disposal
Appliances that are marked with this symbol
have to be disposed of separately from
household rubbish. These appliances contain
valuable resources that can be recycled. A
correct waste disposal protects the environment and the
health of those around you. To get informed about it,
either defer to your municipal administration or the
retailer.
∙ Pull the mains plug out of the socket and disconnect it
from the appliance before getting rid of it. Remove the
door to prevent playing children from being accidentally
locked.
The cooling medium Isobutane (R600a) and
the propellant in the isolation Cyclopentane
(C5H10) are inflammable substances, thus,
need to be appropriately disposed of.
16
Possible cause and solution
∙ There is a power failure
∙ The main fuse has blown.
∙ The appliance is not turned on.
∙ The fuse in the wall socket (if applicable) has blown. This can be checked by
connecting another electrical device to the socket and checking for function.
∙ The cabinet has been overloaded.
∙ The doors are not properly closed.
∙ Insufficient ventilation. The appliance is too close to a wall or other obstruction.
Check the following:
∙ Check for proper positioning (uneven floor).
∙ Are any adjacent objects affected by the running of the cooling unit (i.e. causing
them to vibrate?)
∙ Are there any objects on top of the unit which might be vibrating?
The melt-water drain system is blocked. Clean the discharge opening.
operational problems, check first whether a solution
can be found using this table. If the problem persists,
disconnect the appliance from the mains power and
contact our Customer Service Department.
∙ Make sure the tubes of the cooling circuit don't get
damaged before the proper disposal.
Guarantee
This product is guaranteed against defects in materials
and workmanship for a period of two years from the date
of purchase. Under this guarantee the manufacturer
undertakes to repair or replace any parts found to be
defective, providing the product is returned to one of our
authorised service centres. This guarantee is only valid
if the appliance has been used in accordance with the
instructions, and provided that it has not been modified,
repaired or interfered with by any unauthorised person, or
damaged through misuse.
This guarantee naturally does not cover wear and tear,
nor breakables such as glass and ceramic items, bulbs
etc. This guarantee does not affect your statutory rights,
nor any legal rights you may have as a consumer under
applicable national legislation governing the purchase
of goods. If the product fails to operate and needs to
be returned, pack it carefully, enclosing your name and
address and the reason for return. If within the guarantee
period, please also provide the guarantee card and proof
of purchase.
Tabla de contenido
loading

Tabla de contenido